May 11
21
A residential solar power system consists of four components : photovoltaic panels, charging controller, battery pack and an inverter. The photovoltaic panels convert sun light into electricity. The electricity is sent to the charging controller who keeps the battery pack fully charged, but not over charged. The battery pack sends the electricity to the inverter who converts the DC voltage to household AC at 120 volts and 60 hertz.
Photovoltaic panel
The output of a solar panel is stated in watts. The wattage is stated is typically for peak sun hours. Since the amount of sun light varies through the course of a day, to level out the variations the peak sun hours has been adopted by most manufactures to help installers and customer’s compare different solar panel models.
Suppose a solar panel is rated for 100 watts and an average of six peak sun hours is available per day. Then the solar panel would produce 100 watts * 6 peak hours = 600 watt hours of electricity or 0.6 kilo watt hours (KWh).
Charging controller
Charging controller or charge regulator controls the charging of the battery pack. It continually monitors the battery pack’s charge state. If the batteries are low, it will send electricity from the solar panels to the batteries. It also prevents over charging of the battery pack.
Don’t allow someone to convince you that a charging controller is not really required. Directly connecting the photovoltaic panels to the battery pack can permanently damage the batteries and possibly cause them to explode.
Battery pack
The battery pack’s purpose is to store electricity generated by the solar panels during the day and then at night or during extremely cloudy days provide electricity to the inverter.
The battery pack typically consists of lead acid batteries. Lead acid batteries are relatively inexpensive and readily available. There are many different types, sizes and capacities of batteries available. The most popular are gel cell and AGM deep cycle batteries because they are maintenance free and last a lot longer than wet cell lead acid batteries.
The most important thing to remember about the batteries is that the need to be deep cycle. Deep cycle batteries are designed to be discharged then recharged hundreds if not thousands of times. A deep cycle battery is designed to discharged to nearly empty, but not completely and then be slowly recharged over time. A common mistake for home owners is to think that they can use automotive batteries instead of deep cycle batteries. Car batteries are shallow cycle batteries. They are designed to discharge a lot of current quickly and then be immediately recharged.
Inverter
An inverter converts the DC electricity stored in the battery pack into household 120V AC. Almost everything in your home is powered by 120V electricity. Things like table lamps, freezer, lights, motors, dishwasher, and so on.
Now you have a basic understanding of solar power how it works to power your home. Now you have enough information about how solar power works to determine if it is a technology that you would want to invest in for your house.
| residential power |
| residential solar panels |
| residential solar systems |
Related posts:
